Understanding
and Setting MIG Gas Flow Rates (Part Number WAT-UGF)
Designed for Welders.
Includes:
Reducing Gas Waste and Improving Weld Start Quality
This
Self Study Learning Program is Easy to Follow
|
This Self Study Course Covers:
![bullet](_themes/artsy/artbul1d.gif) | Shielding Gas Safety Issues |
![bullet](_themes/artsy/artbul1d.gif) | What MIG Shielding Gas Does |
![bullet](_themes/artsy/artbul1d.gif) | Setting Minimum Flow Rates |
![bullet](_themes/artsy/artbul1d.gif) | Discussion of Turbulence |
![bullet](_themes/artsy/artbul1d.gif) | Setting Maximum Flow Rates
(They are not much higher than
the typical recommended flow rates! Includes a graphic - not in this
web site - which can be
shared with co-workers to prove high flow rates create problems.) |
![bullet](_themes/artsy/artbul1d.gif) | Gas Volume Versus Pressure |
![bullet](_themes/artsy/artbul1d.gif) | Shielding Gas Waste |
![bullet](_themes/artsy/artbul1d.gif) | Solution to Gas Waste and Weld Start Quality Improvement |
![bullet](_themes/artsy/artbul1d.gif) | Production Examples of Shielding Gas Savings |
![bullet](_themes/artsy/artbul1d.gif) | Why High Pressure is Used
(Discusses why it has been since MIG and
TIG welding were invented!) |
![bullet](_themes/artsy/artbul1d.gif) | Cost of Shielding Gas Leaks |
![bullet](_themes/artsy/artbul1d.gif) | Gas Leaking Out Means Air Leaks In!
(Includes several
pages covering TIG and MIG asphyxiation hazards due to leaks) |
|
This 61 page "Self Study" program is supplied as a PDF
download. All that is needed is a FREE Adobe Reader or similar PDF
reader. |
Click to See Price and Purchase Details |
![](Buy%20Now.jpg)
Purchase
Lean Welding Manufacturing Tools |
More Advanced Training Program
Available:
|
"Lean
Welding Manufacturing- Shielding Gas "
- Learning Program Part Number WAT
LWM-SG
![bullet](_themes/artsy/artbul1d.gif) |
7 Modules, Over
70
page training program for welding foreman, engineers, etc.
|
![bullet](_themes/artsy/artbul1d.gif) |
Shows what flow levels
to set and why.
|
![bullet](_themes/artsy/artbul1d.gif) |
Provides information and theory to understand the problems associated with gas
waste and effects of excess flow rates on weld quality. |
![bullet](_themes/artsy/artbul1d.gif) |
Presents checking gas flow rates at the welding torch and entering feeder. |
![bullet](_themes/artsy/artbul1d.gif) |
Each Module has
a short Quiz |
![bullet](_themes/artsy/artbul1d.gif) |
Example showing ways the data can be recorded and maintained. |
![bullet](_themes/artsy/artbul1d.gif) |
Includes a way
to develop an Excel
Spreadsheet that can be used to quantify the leak rate in pipelines and
hoses. |
![bullet](_themes/artsy/artbul1d.gif) |
NOT SHIPPED- SENT AS A PDF
FILE WITHIN 3 DAYS OF RECEIPT OF PAYMENT |
![bullet](_themes/artsy/artbul1d.gif) |
Want a full explanation of what's included? |
|
![](Buy%20Now.jpg)
Purchase Gas Saving Products |
![](Buy%20Now.jpg)
Purchase
Flow Rate Limiter |
![](Buy%20Now.jpg)
Purchase Wire Feeding Aids |
Welding Math |